Skip to content

Trimble R8S LT

Trimble R8s GNSS ReceiverConfigured for today, scalable for tomorrow

Solusi Terlengkap – Trimble R8s menawarkan skalabilitas tertinggi. Saat kebutuhan Anda berubah-ubah, Trimble R8s LT dapat beradaptasi. Cukup tambahkan fungsionalitas kapan pun Anda membutuhkannya. Buatlah solusi lapangan terkemuka di industri dengan memasangkan   Trimble R8s GNSS Receiver dengan pengontrol Trimble yang cocok dengan perangkat lunak lapangan Trimble Access yang mudah digunakan.

Daripada sistem pra-konfigurasi, sistem Trimble® R8s LT GNSS memberikan Anda berbagai macam fitur dan manfaat yang dibutuhkan. Dalam satu sistem yang fleksibel dan dapat diskalakan. Sangat mudah untuk membangun sistem untuk pekerjaan Anda.

Trimble R8s LT mudah diintegrasikan dengan stasiun total S-Series Trimble dan rover pencitraan Trimble V10 yang inovatif. Buat solusi lengkap dengan menggabungkan receiver Trimble R8s LT dengan pengontrol Trimble yang menjalankan perangkat lunak lapangan Trimble Access ™, dan perangkat lunak perkantoran Trimble Business Center.

Dengan Trimble R8s LT, mudah dan sederhana untuk membangun receiver yang tepat untuk pekerjaan tersebut. Pilihlah tingkat konfigurasi yang paling sesuai dengan kebutuhan Anda, apakah itu pasca-pemrosesan, basis, rover, atau kombinasi fungsi basis dan rover. Setelah Anda memilih tingkat konfigurasi, opsi individu tambahan dapat ditambahkan untuk lebih memperluas fungsionalitas receiver.

Fitur Utama

HARGA SEWA

Harian

Single Base/Rover

Rp2,3jtHarian (24jam)
1x R8S LT GNSS receiver
2x Baterai + charger
1x UHF Antena
Survey tripod + Tribrach & Adapter
Ntrip Compatible
Controller dengan TSM

Full Set

Rp5,5jtHarian (24jam)
2x R8S LT GNSS receiver
4x Baterai + 2x charger
2x UHF Antena
2x Survey tripod/monopod + Tribrach
Ntrip Compatible
Controller dengan TSM

Dual Base + Rover

Rp4,5jtHarian (24jam)
2x R8S LT GNSS receiver
4x Baterai + 2x charger
2x UHF Antena
2x Survey tripod/monopod + Tribrach
Ntrip Compatible
Controller dengan TSM

PERFORMANCE SPECIFICATIONS 

Measurements
  • Advanced Trimble Maxwell 6 Custom Survey GNSS chip with 220 channels

  • Future-proof your investment with Trimble 360 tracking

  • High precision multiple correlators for GNSS pseudo-range measurements

  • Unfiltered, un-smoothed pseudo-range measurements data for low noise, low

    multipath error, low time domain correlation, and high dynamic response

  • Very low noise GNSS carrier phase measurements with <1 mm precision in a 1 Hz

    bandwidth

  • Signal-to-Noise ratios reported in dB-Hz

  • Proven Trimble low elevation tracking technology

  • Satellite signals tracked simultaneously:

    • GPS: L1C/A, L1C, L2C, L2E

    • GLONASS: L1C/A, L1P, L2C/A, L2P

    • SBAS: L1C/A

    • BeiDou (COMPASS): B1, B2

  • SBAS: WAAS, EGNOS, GAGAN

  • Positioning rates: 1 Hz, 2 Hz, 5 Hz, and 10 Hz

 

POSITIONING PERFORMANCE

Code differential GNSS positioning

Horizontal ……………………………………………… 0.25 m + 1 ppm RMS 

Vertical ……………………………………………….. 0.50 m + 1 ppm RMS

SBAS differential positioning accuracy …………………….. typically < 5m 3DRMS

Static GNSS surveying

High-Precision Static

Horizontal ………………………….. 3 mm + 0.1 ppm RMS 

Vertical …………………………………………  3.5 mm + 0.4 ppm RMS

Static and Fast Static

Horizontal ………………………………………….. 3mm + 0.5 ppm RMS

Vertical …………………………………………….. 5 mm + 0.5 ppm RMS

Post processed Kinematic (PPK) GNSS surveying

Horizontal……………………………………………….8mm+1ppmRMS

Vertical ………………………………………………..15mm+1ppmRMS

Real-Time Kinematic surveying

Single Baseline <30 km

Horizontal ………………………………………………. 8mm + 1 ppm RMS

Vertical ……………………………………………… 15 mm + 1ppm RMS  

Network RTK

Horizontal ………………………………………….. 8mm + 0.5 ppm RMS

Vertical ……………………………………………. 15 mm + 0.5 ppm RMS 

Initialization time …………………………………….. typically <8 seconds

Initialization reliability …………………………………….. typically >99.9%

ELECTRICAL

  • Power 10.5 V DC to 28 V DC external power input with over-voltage protection on Port 1 (7-pin Lemo)
  • Rechargeable, removable 7.4 V, 2.8 Ah Lithium-ion smart battery
  • Power consumption is <3.2 W in RTK rover mode with internal radio and Bluetooth® in use
  • Operating times on internal battery8:
    • 450 MHz receive only option …………………………………. 5.0 hours
    • 450 MHz receive/transmit option (0.5W) ……………………… 2.5 hours
    • Cellular receive option ………………………………………. 4.0 hours

COMMUNICATIONS AND DATA STORAGE

  • Serial: 3-wire serial (7-pin Lemo) on Port 1; full RS-232 serial (Dsub 9 pin) on Port 2
  • Radio Modem: fully Integrated, sealed 450 MHz wideband receiver/transmitter with frequency range of 403 MHz to 473 MHz, support of Trimble, Pacific Crest, and SATEL radio protocols:
    • Transmit power: 0.5W
    • Range : 3–5 km typical / 10 km optimal
  • Cellular : fully integrated, sealed internal GSM/GPRS/EDGE/UMTS/HSPA+ modem option. CSD (Circuit-Switched Data) and PSD (Packet-Switched Data) supported. Global Operation:
    • Penta-Band UMTS / HSPA+ (850 / 800, 900, 1900, and 2100 MHz)
    • Quad-Band GSM/CSD & GPRS/EDGE (850, 900, 1800, and 1900 MHz)
  • Bluetooth: fully integrated, fully sealed 2.4 GHz communications port (Bluetooth)
  • External communication devices for corrections supported on Serial and Bluetooth ports
  • Data storage: 56 MB internal memory, 960 hours of raw observables (approx. 1.4 MB/day), based on recording every 15 sec from an average of 14 satellites
Data Formats
  • CMR+, CMRx, RTCM2.1, RTCM2.3, RTCM3.0, RTCM3.1 inputs and outputs
  • 23 NMEA outputs, GSOF, RT17 and RT27 outputs, supports BINEX and smoothed carrier
WebUI
  • Offers simple configuration, operation, status, and data transfer
  • Accessible via Serial and Bluetooth Supported Trimble Controllers
  • Trimble TSC3, Trimble Slate, Trimble CU, Trimble Tablet Rugged PC
Certifications

FCC Part 15 (Class B device), Part 15.247 and Part 90 ; ICES-003, RSS-210 and RSS-119; CE Mark; C-Tick; Bluetooth EPL

Hubungi Kami

Jl.Tukad Balian No.154B, Denpasar, Bali

Customers Support & Sale:

Senin-Sabtu: 09:00–18:00